R&S FSW-K7 User Manual page 11

®
R&S FSW-K7
1 = Channel bar for firmware and measurement settings
2+3 = Window title bar with diagram-specific (trace) information
4 = Diagram area
5 = Diagram footer with diagram-specific information, depending on result display
6 = Instrument status bar with error messages, progress bar and date/time display
MSRA/MSRT operating mode
In MSRA/MSRT operating mode, additional tabs and elements are available. A colored
background of the screen behind the measurement channel tabs indicates that you are
in MSRA/MSRT operating mode.
For details on the MSRA operating mode see the R&S FSW MSRA User Manual. For
details on the MSRT operating mode see the R&S FSW Realtime Spectrum Applica-
tion and MSRT Operating Mode User Manual.
Channel bar information
In the Analog Demodulation application, the R&S FSW shows the following settings:
Table 2-1: Information displayed in the channel bar in the Analog Demodulation application
Ref Level
m.+el.Att
Offset
AQT
RBW
DBW
Freq
User Manual 1173.9240.02 ─ 23
Welcome to the Analog Demodulation Application
Understanding the Display Information
Reference level
Mechanical and electronic RF attenuation
Reference level offset
Measurement time for data acquisition.
Resolution bandwidth
Demodulation bandwidth
Center frequency for the RF signal
11