R&S FSW-K7 User Manual page 327

®
R&S FSW-K7
Example:
Usage:
11.8.1.2 General Marker Settings
The following commands control general marker functionality.
See also
CALCulate<n>:MARKer<m>:X:SSIZe
CALCulate<n>:MARKer<m>:LINK
DISPlay:MINFo[:STAT]
DISPlay:MTABle
CALCulate<n>:MARKer<m>:X:SSIZe <StepSize>
This command selects the marker step size mode for all markers in all windows.
The step size defines the distance the marker moves when you move it with the rotary
knob.
It therefore takes effect in manual operation only.
Suffix:
<n>, <m>
Parameters:
<StepSize>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:LINK <DisplayType>
Links the specified marker in all displays of the specified type.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
INIT:CONT OFF
Switches to single sweep mode.
INIT;*WAI
Starts a sweep and waits for its end.
CALC:DELT2 ON
Switches on delta marker 2.
CALC:DELT2:Y?
Outputs measurement value of delta marker 2.
Query only
"Fixed Reference Marker Settings"
................................................................................... 327
................................................................................................... 328
............................................................................................................ 328
.
irrelevant
STANdard
the marker moves from one pixel to the next
POINts
the marker moves from one sweep point to the next
*RST:
CALC:MARK:X:SSIZ STAN
Sets the marker step size to one pixel.
See "Marker Stepsize"
on page 344
.............................................................................. 327
POINts
on page 142
Analyzing Results
327