R&S FSW-K7 User Manual page 59

®
R&S FSW-K7
"Table"
Remote command:
Average for range 1:
[SENSe:]MIXer:LOSS[:LOW]
Table for range 1:
[SENSe:]MIXer:LOSS:TABLe[:LOW]
Average for range 2:
[SENSe:]MIXer:LOSS:HIGH
Table for range 2:
[SENSe:]MIXer:LOSS:TABLe:HIGH
Basic Settings
Access: INPUT/OUTPUT > "External Mixer Config" > "Basic Settings"
The basic settings concern general use of an external mixer. They are only available if
the External Mixer State
LO Level........................................................................................................................59
Signal
Auto
Auto ID
Bias
LO Level
Defines the LO level of the external mixer's LO port. Possible values are from
13.0 dBm to 17.0 dBm in 0.1 dB steps. Default value is 15.5 dB.
User Manual 1173.9240.02 ─ 23
Defines the conversion loss via the table selected from the list. Pre-
defined conversion loss tables are often provided with the external
mixer and can be imported to the R&S FSW. Alternatively, you can
define your own conversion loss tables. Imported tables are checked
for compatibility with the current settings before being assigned.
Conversion loss tables are configured and managed in the
sion Loss Table
For details on conversion loss tables, see the External Mixer descrip-
tion in the R&S FSW User Manual.
For details on importing tables, see
is "On".
ID........................................................................................................................60
ID.......................................................................................................................... 60
Threshold......................................................................................................... 60
Settings................................................................................................................. 60
└ Write to <CVL table
tab.
on page 198
on page 198
on page 197
on page 197
name>.............................................................................61
Configuration
Input and Frontend Settings
"Import Table" on page 62.
Conver-
59