Limit Line Settings And Functions - R&S FSW-K7 User Manual

®
R&S FSW-K7
Remote commands:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
n dB down Marker
n dB down Delta
n dB down Marker State
Activates or deactivates the special n dB down marker function.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:STATe
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:RESult?
n dB down Delta Value
Defines the delta level from the reference marker 1 used to determine the bandwidth or
time span.
Remote command:
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:FREQuency?
CALCulate<n>:MARKer<m>:FUNCtion:NDBDown:TIME?
6.3.4.4 Deactivating All Marker Functions
Access: "Overview" > "Analysis" > "Marker Functions" > "All Functions Off"
Or: MKR FUNC > "All Functions Off"
All special marker functions can be deactivated in one step.

6.4 Limit Line Settings and Functions

Access: "Overview" > "Analysis" > "Lines"
or: LINES > "Line Config"
Up to 8 limit lines can be displayed simultaneously in the R&S FSW. Many more can
be stored on the instrument.
Stored limit line settings
When storing and recalling limit line settings, consider the information provided in the
Data Management chapter of the R&S FSW User Manual.
● Limit Line
● Limit Line
User Manual 1173.9240.02 ─ 23
State..............................................................................................154
Value................................................................................................154
Management.........................................................................................155
Details...................................................................................................157

Limit Line Settings and Functions

on page 352
on page 352
on page 352
on page 352
on page 351
on page 353
Analysis
154