R&S FSW-K7 User Manual page 301

®
R&S FSW-K7
some parameters for the following commands also depend on the selected measure-
ment channel.
Note that the suffix <n> always refers to the window in the currently selected measure-
ment channel (see
LAYout:ADD[:WINDow]?
LAYout:CATalog[:WINDow]?
LAYout:IDENtify[:WINDow]?
LAYout:REMove[:WINDow]
LAYout:REPLace[:WINDow]
LAYout:SPLitter
LAYout:WINDow<n>:ADD?
LAYout:WINDow<n>:IDENtify?
LAYout:WINDow<n>:REMove
LAYout:WINDow<n>:REPLace
LAYout:ADD[:WINDow]? <WindowName>,<Direction>,<WindowType>
This command adds a window to the display in the active measurement channel.
This command is always used as a query so that you immediately obtain the name of
the new window as a result.
To replace an existing window, use the
Parameters:
<WindowName>
<Direction>
<WindowType>
Return values:
<NewWindowName> When adding a new window, the command returns its name (by
Example:
Usage:
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
INSTrument[:SELect]
.................................................................................................301
...........................................................................................302
............................................................................................303
.............................................................................................303
............................................................................................303
............................................................................................................. 304
.............................................................................................305
........................................................................................306
......................................................................................... 306
........................................................................................306
String containing the name of the existing window the new win-
dow is inserted next to.
By default, the name of a window is the same as its index. To
determine the name and index of all active windows, use the
LAYout:CATalog[:WINDow]?
LEFT | RIGHt | ABOVe | BELow
Direction the new window is added relative to the existing win-
dow.
text value
Type of result display (evaluation method) you want to add.
See the table below for available parameter values.
default the same as its number) as a result.
LAY:ADD? '1',BEL,'XTIM:AM:RELative[:TDOMain]'
Adds an AM Time Domain display below window 1.
Query only
Configuring the Result Display
on page 186).
LAYout:REPLace[:WINDow]
query.
command.
301