R&S FSW-K7 User Manual page 348

®
R&S FSW-K7
Parameters:
<MaxNoPeaks>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:SORT <SortMode>
This command selects the order in which the results of a peak search are returned.
Suffix:
<n>
<m>
Parameters:
<SortMode>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:STATe <State>
This command turns a peak search on and off.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:X?
This command queries the position of the peaks on the x-axis.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
Maximum number of peaks to be determined.
Range: 1 to 200
*RST: 50
CALC:MARK:FUNC:FPE:LIST:SIZE 10
The marker peak list will contain a maximum of 10 peaks.
See "Maximum Number of Peaks"
.
Window
Marker
X
Sorts the peaks according to increasing position on the x-axis.
Y
Sorts the peaks according to decreasing position on the y-axis.
*RST: X
CALC:MARK:FUNC:FPE:SORT Y
Sets the sort mode to decreasing y values
See "Sort Mode" on page 151
.
Window
Marker
ON | OFF | 1 | 0
*RST: 0
CALC:MARK:FUNC:FPE:STAT ON
Activates marker peak search
See "Peak List State"
on page 152
on page 151
Analyzing Results
348