R&S FSW-K7 User Manual page 252

®
R&S FSW-K7
[SENSe:]ADEMod<n>:SPECtrum:BANDwidth[:RESolution]
[SENSe:]ADEMod<n>:SPECtrum:BWIDth[:RESolution]
[SENSe:]ADEMod<n>:SRATe?
[SENSe:]BANDwidth:DEMod
[SENSe:]BWIDth:DEMod
[SENSe:]BANDwidth:DEMod:TYPE
[SENSe:]BWIDth:DEMod:TYPE
[SENSe:]BANDwidth[:RESolution]
[SENSe:]SWEep:COUNt
[SENSe:]SWEep:POINts
[SENSe:]ADEMod<n>:MTIMe <Time>
This command defines the measurement time for analog demodulation.
Suffix:
<n>
Parameters:
<Time>
Example:
Manual operation:
[SENSe:]ADEMod<n>:RLENgth?
This command returns the record length set up for the current analog demodulation
measurement.
Suffix:
<n>
Example:
Usage:
[SENSe:]ADEMod<n>:SET <SampleRate> | <RecordLength> | <TriggerSource> |
This command configures the analog demodulator of the instrument.
Suffix:
<n>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
....................................................................................... 254
...........................................................................................254
................................................................................................ 254
.......................................................................................255
.................................................................................................255
.................................................................................................256
.
irrelevant
*RST:
ADEM:MTIM 62.5us
Sets the measurement time to 62.5 µs.
See "Measurement Time (AQT)"
.
irrelevant
ADEM:RLEN?
Returns the current record length.
Query only
<TriggerSlope> | <OffsetSamples> | <NoOfMeas>
.
irrelevant
................................................254
..................................................... 254
................................................................................. 255
................................................................................... 255
62.5us
Configuring the Measurement
on page 106
252