R&S FSW-K7 User Manual page 225

®
R&S FSW-K7
Example:
Manual operation:
[SENSe:]PMETer<p>:MTIMe:AVERage[:STATe] <State>
This command turns averaging for power sensor measurements on and off.
Suffix:
<p>
Parameters:
<State>
Example:
Manual operation:
[SENSe:]PMETer<p>:ROFFset[:STATe] <State>
This command includes or excludes the reference level offset of the analyzer for power
sensor measurements.
Suffix:
<p>
Parameters:
<State>
Example:
Manual operation:
[SENSe:]PMETer<p>[:STATe] <State>
This command turns a power sensor on and off.
Suffix:
<p>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
PMET2:MTIM:AVER ON
Activates manual averaging.
PMET2:MTIM:AVER:COUN 8
Sets the number of readings to 8.
See "Average Count (Number of Readings)"
.
1...4
Power sensor index
ON | OFF | 1 | 0
*RST: 0
PMET2:MTIM:AVER ON
Activates manual averaging.
See "Meas Time/Average"
.
1...4
Power sensor index
ON | 1
Includes the reference level offset in the results.
OFF | 0
Ignores the reference level offset.
*RST: 1
PMET2:ROFF OFF
Takes no offset into account for the measured power.
See "Use Ref Lev Offset"
.
1...4
Power sensor index
Configuring the Measurement
on page 86
on page 85
on page 86
225