R&S FSW-K7 User Manual page 197

®
R&S FSW-K7
[SENSe:]MIXer:HARMonic:TYPE <OddEven>
This command specifies whether the harmonic order to be used should be odd, even,
or both.
Which harmonics are supported depends on the mixer type.
Parameters:
<OddEven>
Example:
Manual operation:
[SENSe:]MIXer:HARMonic[:LOW] <HarmOrder>
This command specifies the harmonic order to be used for the low (first) range.
Parameters:
<HarmOrder>
Example:
Manual operation:
[SENSe:]MIXer:LOSS:HIGH <Average>
This command defines the average conversion loss to be used for the entire high (sec-
ond) range.
Parameters:
<Average>
Example:
Manual operation:
[SENSe:]MIXer:LOSS:TABLe:HIGH <FileName>
This command defines the file name of the conversion loss table to be used for the
high (second) range.
Parameters:
<FileName>
Example:
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
ODD | EVEN | EODD
*RST: EVEN
MIX:HARM:TYPE ODD
See "Harmonic Type"
numeric value
Range: 2 to 61 (USER band); for other bands: see band
definition
*RST: 2 (for band F)
MIX:HARM 3
See "Harmonic Order"
numeric value
Range: 0 to 100
*RST: 24.0 dB
Default unit: dB
MIX:LOSS:HIGH 20dB
See "Conversion loss"
String containing the path and name of the file.
MIX:LOSS:TABL:HIGH 'MyCVLTable'
Configuring the Measurement
on page 58
on page 58
on page 58
197