R&S FSW-K7 User Manual page 144

®
R&S FSW-K7
Remote command:
CALCulate<n>:MARKer<m>:PEXCursion
6.3.2.2 Positioning Functions
Access: MKR ->
The following functions set the currently selected marker to the result of a peak search
or set other characteristic values to the current marker value.
Select
Peak
Search Next
Search
Search Next
Select Marker
The "Select Marker" function opens a dialog box to select and activate or deactivate
one or more markers quickly.
Remote command:
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:DELTamarker<m>[:STATe]
Peak Search
Sets the selected marker/delta marker to the maximum of the trace. If no marker is
active, marker 1 is activated.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
Search Next Peak
Sets the selected marker/delta marker to the next (lower) maximum of the assigned
trace. If no marker is active, marker 1 is activated.
User Manual 1173.9240.02 ─ 23
Working with Markers in the R&S FSW Analog Demodulation application
Marker.............................................................................................................. 144
Search................................................................................................................144
Peak....................................................................................................... 144
Minimum......................................................................................................... 145
Minimum.................................................................................................145
on page 338
on page 320
on page 324
on page 339
on page 342
Analysis
144