R&S FSW-K7 User Manual page 349

®
R&S FSW-K7
The order depends on the sort order that has been set with
MARKer<m>:FUNCtion:FPEaks:SORT.
Suffix:
<n>, <m>
Return values:
<PeakPosition>
Usage:
CALCulate<n>:MARKer<m>:FUNCtion:FPEaks:Y?
This command queries the position of the peaks on the y-axis.
The order depends on the sort order that has been set with
MARKer<m>:FUNCtion:FPEaks:SORT.
Suffix:
<n>, <m>
Return values:
<PeakPosition>
Usage:
MMEMory:STORe<n>:LIST <FileName>
This command exports the SEM and spurious emission list evaluation to a file.
The file format is *.dat.
Secure User Mode
In secure user mode, settings that are stored on the instrument are stored to volatile
memory, which is restricted to 256 MB. Thus, a "Memory full" error can occur although
the hard disk indicates that storage space is still available.
To store data permanently, select an external storage location such as a USB memory
device.
For details, see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S FSW User Manual.
Suffix:
<n>
Parameters:
<FileName>
Example:
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
irrelevant
Position of the peaks on the x-axis. The unit depends on the
measurement.
Query only
.
irrelevant
Position of the peaks on the y-axis. The unit depends on the
measurement.
Query only
.
Window
String containing the path and name of the target file.
MMEM:STOR:LIST 'test'
Stores the current list evaluation results in the test.dat file.
Analyzing Results
CALCulate<n>:
CALCulate<n>:
349