R&S FSW-K7 User Manual page 280

®
R&S FSW-K7
This command is identical to CALC:UNIT:ANGL
Suffix:
<n>
Parameters:
<Unit>
Example:
Manual operation:
UNIT<n>:THD <Mode>
Selects the unit for THD measurements (<n> is irrelevant).
This command is identical to CALC:UNIT:THD
Suffix:
<n>
Parameters:
<Mode>
Example:
Manual operation:
11.4.8.9 Relative Demodulation Results
The following commands are required to obtain relative demodulation results.
CONFigure:ADEMod:RESults:AM:DETector<det>:REFerence
CONFigure:ADEMod:RESults:FM:DETector<det>:REFerence
CONFigure:ADEMod:RESults:PM:DETector<det>:REFerence
CONFigure:ADEMod:RESults:AM:DETector<det>:STATe
CONFigure:ADEMod:RESults:FM:DETector<det>:STATe
CONFigure:ADEMod:RESults:PM:DETector<det>:STATe
CONFigure:ADEMod:RESults:AM:DETector<det>:REFerence:MEAStoref
CONFigure:ADEMod:RESults:FM:DETector<det>:REFerence:MEAStoref
CONFigure:ADEMod:RESults:PM:DETector<det>:REFerence:MEAStoref
CONFigure:ADEMod:RESults:AM:DETector<det>:MODE
CONFigure:ADEMod:RESults:FM:DETector<det>:MODE
CONFigure:ADEMod:RESults:PM:DETector<det>:MODE
CONFigure:ADEMod:RESults:UNIT
CONFigure:ADEMod:RESults:AM:DETector<det>:REFerence <RefValue>
CONFigure:ADEMod:RESults:FM:DETector<det>:REFerence <RefValue>
CONFigure:ADEMod:RESults:PM:DETector<det>:REFerence <RefValue>
Defines the reference value to be used for relative demodulation results and recalcu-
lates the results. If necessary, the detector is activated.
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
Window
DEG | RAD
*RST: RAD
UNIT:ANGL DEG
See "Phase Unit (Rad/Deg)"
.
Window
DB | PCT
*RST: DB
UNIT:THD PCT
See "THD Unit (% / DB)"
................................................................................. 282
Configuring the Measurement
on page 124
on page 124
........................................... 280
............................................280
........................................... 280
..................................................281
.................................................. 281
..................................................281
........................... 282
........................... 282
........................... 282
.................................................. 282
.................................................. 282
.................................................. 282
280