R&S FSW-K7 User Manual page 320

®
R&S FSW-K7
CALCulate<n>:MARKer<m>:AOFF
This command turns off all markers.
Suffix:
<n>
<m>
Example:
Usage:
Manual operation:
CALCulate<n>:MARKer<m>:LINK:TO:MARKer<m> <State>
This command links normal marker <m1> to any active normal marker <m2>.
If you change the horizontal position of marker <m2>, marker <m1> changes its hori-
zontal position to the same value.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:MARKer<m>[:STATe] <State>
This command turns markers on and off. If the corresponding marker number is cur-
rently active as a delta marker, it is turned into a normal marker.
Suffix:
<n>
<m>
Parameters:
<State>
Example:
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
Window
Marker
CALC:MARK:AOFF
Switches off all markers.
Event
See "All Markers Off"
.
Window
Marker
ON | OFF | 1 | 0
*RST: 0
CALC:MARK4:LINK:TO:MARK2 ON
Links marker 4 to marker 2.
See "Linking to Another Marker"
.
Window
Marker
ON | OFF | 1 | 0
*RST: 0
CALC:MARK3 ON
Switches on marker 3.
on page 141
on page 140
Analyzing Results
320