R&S FSW-K7 User Manual page 290

®
R&S FSW-K7
[SENSe:]ADEMod<n>:FM:AFSPectrum[:TYPE]
[SENSe:]ADEMod<n>:PM[:TDOMain][:TYPE]
[SENSe:]ADEMod<n>:PM:AFSPectrum[:TYPE]
[SENSe:]ADEMod<n>:SPECtrum[:TYPE] <TraceMode1>, <TraceMode2>,
This command selects the trace modes of the evaluated signal to be measured simul-
taneously. For each of the six available traces a mode can be defined.
The trace modes are configured identically for all windows with a specific evaluation.
The following table indicates which command syntax refers to which evaluation
method.
Command syntax
AM[:ABSolute][:TDOMain]
AM:RELative[:TDOMain]
AM:RELative:AFSPectrum
FM[:TDOMain]
FM:AFSPectrum
PM[:TDOMain]
PM:AFSPectrum
SPECtrum
Note: The trace modes for each trace and each window can also be configured individ-
ually using the DISP:TRAC:MODE command, see
TRACe<t>:MODE
Suffix:
<n>
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
<TraceMode3>, <TraceMode4>, <TraceMode5>, <TraceMode6>
on page 287.
.
irrelevant
Configuring the Measurement
Evaluation method
RF time domain
AM time domain
AM spectrum
FM time domain
FM spectrum
PM time domain
PM spectrum
RF spectrum
DISPlay[:WINDow<n>]:
290