R&S FSW-K7 User Manual page 293

®
R&S FSW-K7
Suffix:
<n>
<t>
Parameters:
<Detector>
Example:
Manual operation:
[SENSe:][WINDow<n>:]DETector<t>[:FUNCtion]:AUTO <State>
This command couples and decouples the detector to the trace mode.
Suffix:
<n>
<t>
Parameters:
<State>
Example:
Manual operation:
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
.
Window
Trace
APEak
Autopeak
NEGative
Negative peak
POSitive
Positive peak
SAMPle
First value detected per trace point
RMS
RMS value
AVERage
Average
*RST: APEak
DET POS
Sets the detector to "positive peak".
See "Detector" on page 135
.
Window
Trace
ON | OFF | 0 | 1
*RST: 1
DET:AUTO OFF
The selection of the detector is not coupled to the trace mode.
See "Detector" on page 135
Configuring the Measurement
293