Annex; A Reference; Predefined Standards And Settings - R&S FSW-K7 User Manual

®
R&S FSW-K7

Annex

A Reference

A.1 Predefined Standards and Settings
You can configure the Analog Demodulation application using predefined standard set-
tings. This allows for quick and easy configuration for commonly performed measure-
ments.
For details see
on page 51.
Provided standard files
The instrument comes prepared with the following standard settings:
●
AM Broadcast
●
FM Narrowband
●
FM Broadcast
●
Frequency Settling
●
None (default settings)
The default storage location for the settings files is:
C:\R_S\INSTR\USER\user\predefined\AdemodPredefined.
Predefined settings
The following parameters can be stored in a standard settings file. Any parameters that
are not included in the xml file are set to their default values when the standard is loa-
ded.
Measurement settings:
●
DBW
●
AQT
●
Demod Filter
●
Sweep Points
●
Squelch (State, Level)
●
Units (Phase, THD)
●
RF Span
Window display settings:
●
Position
●
State
●
Window number
User Manual 1173.9240.02 ─ 23
Chapter 5.2, "Configuration According to Digital

Predefined Standards and Settings

Standards",
Reference
379