R&S FSW-K7 User Manual page 139

®
R&S FSW-K7
In the Analog Demodulation application, up to 17 markers or delta markers can be acti-
vated for each window simultaneously.
The markers are distributed among 3 tabs for a better overview. By default, the first
marker is defined as a normal marker, whereas all others are defined as delta markers
with reference to the first marker. All markers are assigned to trace 1, but only the first
marker is active.
Selected
Marker
Marker Position
Marker
Reference
Linking to Another
Assigning the Marker to a
All Markers
Selected Marker
Marker name. The marker which is currently selected for editing is highlighted orange.
Remote command:
Marker selected via suffix <m> in remote commands.
Marker State
Activates or deactivates the marker in the diagram.
Remote command:
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:DELTamarker<m>[:STATe]
User Manual 1173.9240.02 ─ 23
Working with Markers in the R&S FSW Analog Demodulation application
Marker.......................................................................................................... 139
State................................................................................................................139
(X-value)............................................................................................140
Type................................................................................................................ 140
Marker....................................................................................................... 140
Marker........................................................................................... 140
Trace................................................................................. 141
Off............................................................................................................ 141
on page 320
on page 324
Analysis
139