R&S FSW-K7 User Manual page 84

®
R&S FSW-K7
Unit/Scale......................................................................................................................85
Meas
Setting the Reference Level from the Measurement
Reference
Use Ref Lev
Average Count (Number of
Duty
Using the power sensor as an external
State
Switches the power measurement for all power sensors on or off. Note that in addition
to this general setting, each power sensor can be activated or deactivated individually
by the
settings.
Remote command:
[SENSe:]PMETer<p>[:STATe]
Continuous Value Update
If activated, the power sensor data is updated continuously during a sweep with a long
sweep time, and even after a single sweep has completed.
This function cannot be activated for individual sensors.
If the power sensor is being used as a trigger (see
external trigger"
ignored.
Remote command:
[SENSe:]PMETer<p>:UPDate[:STATe]
Select
Selects the individual power sensor for usage if power measurement is generally acti-
vated
The detected serial numbers of the power sensors connected to the instrument are
provided in a selection list. For each of the four available power sensor indexes
("Power Sensor 1"..."Power Sensor 4"), which correspond to the tabs in the configura-
tion dialog, one of the detected serial numbers can be assigned. The physical sensor is
thus assigned to the configuration setting for the selected power sensor index.
By default, serial numbers not yet assigned are automatically assigned to the next free
power sensor index for which "Auto Assignment" is selected.
Alternatively, you can assign the sensors manually by deactivating the "Auto" option
and selecting a serial number from the list.
Remote command:
[SENSe:]PMETer<p>[:STATe]
SYSTem:COMMunicate:RDEVice:PMETer<p>:DEFine
User Manual 1173.9240.02 ─ 23
Time/Average...................................................................................................... 85
Value........................................................................................................... 86
Offset........................................................................................................86
Cycle.....................................................................................................................86
└ External Trigger Level.....................................................................................87
└ Hysteresis....................................................................................................... 87
└ Trigger Holdoff................................................................................................ 87
└ Drop-Out Time................................................................................................ 87
└ Slope...............................................................................................................87
Select setting on each tab. However, the general setting overrides the individual
on page 86), continuous update is not possible; this setting is
(State function).
Readings)..........................................................................86
trigger..............................................................86
on page 225
on page 226
on page 225
Configuration
Input and Frontend Settings
(Meas->Ref)................................86
"Using the power sensor as an
on page 219
84