R&S FSW-K7 User Manual page 303

®
R&S FSW-K7
Example:
Usage:
LAYout:IDENtify[:WINDow]? <WindowName>
This command queries the index of a particular display window in the active measure-
ment channel.
Note: to query the name of a particular window, use the
IDENtify?
Query parameters:
<WindowName>
Return values:
<WindowIndex>
Example:
Usage:
LAYout:REMove[:WINDow] <WindowName>
This command removes a window from the display in the active measurement channel.
Parameters:
<WindowName>
Example:
Usage:
LAYout:REPLace[:WINDow] <WindowName>,<WindowType>
This command replaces the window type (for example from "Diagram" to "Result Sum-
mary") of an already existing window in the active measurement channel while keeping
its position, index and window name.
To add a new window, use the
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
LAY:CAT?
Result:
'2',2,'1',1
Two windows are displayed, named '2' (at the top or left), and '1'
(at the bottom or right).
Query only
query.
String containing the name of a window.
Index number of the window.
LAY:WIND:IDEN? '2'
Queries the index of the result display named '2'.
Response:
2
Query only
String containing the name of the window.
In the default state, the name of the window is its index.
LAY:REM '2'
Removes the result display in the window named '2'.
Event
LAYout:ADD[:WINDow]?
Configuring the Result Display
LAYout:WINDow<n>:
command.
303