Data Acquisition; Bandwidth Settings - R&S FSW-K7 User Manual

®
R&S FSW-K7
Which pulse level will be sent is indicated by a graphic on the button.
Remote command:
OUTPut:TRIGger<port>:PULSe:IMMediate

5.5 Data Acquisition

Access: "Overview" > "Data Acquisition"
How data is to be acquired and then demodulated is configured in the "Data Acquisi-
tion" dialog box.
MSRA/MSRT operating mode
In MSRA/MSRT operating mode, only the MSRA/MSRT Master channel actually cap-
tures data from the input signal. The data acquisition settings for the Analog Demodu-
lation application in MSRA/MSRT mode define the analysis interval.
For details on the MSRA operating mode see the R&S FSW MSRA User Manual. For
details on the MSRT operating mode see the R&S FSW Real-Time Spectrum Applica-
tion and MSRT Operating Mode User Manual.
● Bandwidth
● Sweep

5.5.1 Bandwidth Settings

Access: "Overview" > "Data Acquisition" > "Bandwidth" tab
The bandwidth settings define which parts of the input signal are acquired and then
demodulated.
User Manual 1173.9240.02 ─ 23
Settings............................................................................................... 105
Settings..................................................................................................... 107
Configuration

Data Acquisition

on page 266
105