R&S FSW-K7 User Manual page 365

®
R&S FSW-K7
Example:
Manual operation:
CALCulate<n>:LIMit<k>:DELete
This command deletes a limit line.
Suffix:
<n>
<k>
Usage:
Manual operation:
CALCulate<n>:LIMit<k>:STATe <State>
This command turns the limit check for a specific limit line on and off.
To query the limit check result, use CALCulate<n>:LIMit<k>:FAIL?.
Note that a new command exists to activate the limit check and define the trace to be
checked in one step (see
on page 365).
Suffix:
<n>
<k>
Parameters:
<State>
Example:
Manual operation:
CALCulate<n>:LIMit<k>:TRACe<t>:CHECk <State>
This command turns the limit check for a specific trace on and off.
To query the limit check result, use CALCulate<n>:LIMit<k>:FAIL?.
Note that this command replaces the two commands from previous signal and spec-
trum analyzers (which are still supported, however):
●
CALC:LIM:TRAC; see the description of commands for compatibility in the
R&S FSW User Manual
User Manual 1173.9240.02 ─ 23
Remote Commands for Analog Demodulation Measurements
CALC:LIM1:COPY 2
Copies limit line 1 to line 2.
CALC:LIM1:COPY 'FM2'
Copies limit line 1 to a new line named FM2.
See "Copy Line" on page 157
.
Window
Limit line
Event
See "Delete Line" on page 157
CALCulate<n>:LIMit<k>:TRACe<t>:CHECk
.
irrelevant
Limit line
ON | OFF | 1 | 0
*RST: 0
CALC:LIM:STAT ON
Switches on the limit check for limit line 1.
See "Disable All Lines"
Analyzing Results
on page 157
365