Ricoh D037 Service Manual page 551

Control Time 1 Duplex 226
026
Center Temp.3:MThick:-226
Control Time 2 Duplex 226
027
Ends Temp.3:MThick:-226
028 Center Temp.4:MThick:-226
029 Ends Temp.4:MThick:-226
030 Center Temp.1:Other:226-
031 Ends Temp.1:Other:226-
032 Center Temp.2:Other:226-
033 Ends Temp.2:Other:226-
034 Center Temp.3:Other:-226
035 Ends Temp.3:Other:-226
036 Center Temp.4:Other:-226
037 Ends Temp.4:Other:-226
1117 [Idling Time After Heater OFF]
After Ready
001
Specifies the idling time without the lamp on after reaching the ready
temperature.
After Job End
002
Specifies the idling time without the lamp on after job end.
This idling prevents the heating roller overheating after job end.
1118 [Curl Temp Correction]
001 Operation Pattern
SM Appendix
ENG
ENG [-10 to 10 / -5 / 1 deg/step]
ENG
ENG
ENG
[-10 to 10 / 0 / 1 deg/step]
ENG
ENG
ENG
ENG
ENG
[-10 to 10 / -5 / 1 deg/step]
ENG
[-10 to 10 / 0 / 1 deg/step]
ENG
ENG [0 to 4 / 4 / 1 sec/step] DFU
ENG [0 to 4 / 0 / 1 sec/step]
*ENG
[0 to 3 / 0 / 1]
9-17
System Service Mode
D037/D038/D040/D041