Test pattern check
6.1.3 IMAGE PROBLEMS AT REGULAR INTERVALS
If a defect occurs in the image at one of these intervals, the related component may be
defective.
Development roller: 32 mm
PTR (Paper Transfer Roller): 75.0 mm
Drum: 94.2 mm
Fusing belt: 157.1 mm
SM Appendix
Possible cause/Countermeasure
1.
Do SP1-902-001 (Drum phase adjustment); see
Replacement and Adjustment – Drive Unit – Gear
Unit for details.
2.
Reinstall or replace the PCDU.
3.
Check or replace the drive unit.
6-9
Troubleshooting Guide
D037/D038/D040/D041
Need help?
Do you have a question about the D037 and is the answer not in the manual?
Questions and answers