Ricoh D037 Service Manual page 628

System Service Mode
004 Paper Transfer: Low: 2nd
[SP1: T-Edge Correct] Special 1 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2753 and SP2757 are multiplied by these SP values.
2773
Standard: 120 mm/sec, Low: 60 mm/sec
The paper trailing edge area can be adjusted with SP2774.
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
005 Paper Transfer: Low: 2nd
[SP 1: Switch Timing: T-Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2774
plate at the paper trailing edge between the erase margin area and the image
area.
Standard: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 1: Env. Correct Table]
2780
Standard: 120mm/sec, Low: 60mm/sec
003 Paper Transfer:BW:Standard:1st
004 Paper Transfer:BW:Standard:2nd
D037/D038/D040/D041
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to -100 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [1 to 50 / 23 / 1-uA /step]
*ENG
[1 to 50 / 26 / 1-uA /step]
9-94 SM Appendix