Ricoh D037 Service Manual page 543

Target Temp. After Ready
082
Specifies the target temperature for the maintain mode after the machine has
reached the target temperature in warm-up mode.
Recovery Target Temp.
083
Specifies the target temperature for the print mode without printing/copying job
after the machine's recovery.
087 Thick 2: FC: Simplex: Ends
088 Thick 2: BW: Simplex: Ends
089 Thick 3: FC: Simplex: Center
090 Thick 3: FC: Simplex: Ends
091 Thick 3: BW: Simplex: Center
092 Thick 3: BW: Simplex: Ends
109 M-Thick:FC:Simplex:Center
110 M-Thick:FC:Duplex:Center
111 M-Thick: BW: Simplex:Center
112 M-Thick: BW: Duplex:Center
113 M-Thick: FC: Simplex: Ends
114 M-Thick: FC: Duplex: Ends
115 M-Thick: BW: Simplex: Ends
116 M-Thick: BW: Duplex: Ends
120 Plain2: FC: Simplex:Center
121 Plain2: FC: Simplex:Ends
122 Plain2: FC: Duplex:Center
123 Plain2: FC: Duplex:Ends
SM Appendix
System Service Mode
*ENG [140 to 165 / 160 / 1 deg/step]
*ENG
[140 to 160 / 155 / 1 deg /step]
*ENG
[135 to 180 / 160 / 1 deg/step]
*ENG
*ENG
*ENG
[135 to 180 / 165 / 1 deg/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[125 to 175 / 155 / 1 deg/step]
*ENG
*ENG
*ENG
*ENG
*ENG
[125 to 175 / 150 / 1 deg/step]
*ENG
*ENG
*ENG
9-9 D037/D038/D040/D041