Ricoh D037 Service Manual page 651

Control
Selects the process control mode that is done before ACC.
005 P-Pattern Selection
3043 [TD Adjustment Mode]
Repeat Number: Power ON
Specifies the maximum number of repeats of the toner density adjustment at
power on.
0: Disabled, 1 to 3: Repeat number,
001
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low,
and toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Initial
Specifies the maximum number of repeats of the toner density adjustment at
the developer initialization.
0: Disabled, 1 to 3: Repeat number,
002
4: Repeat three times (No consumption mode)
5: Repeat three times (Toner is supplied only when the toner density is too low,
and toner is consumed only when the toner density is too dark.)
6 to 9: Disabled
Repeat Number: Non-use
Specifies the maximum number of repeats of the toner density adjustment in
003
stand by mode.
0: Disabled, 1 to 3: Repeat number,
4: Repeat three times (No consumption mode)
SM Appendix
0: Not Executed
1: Process Control
2: TC Control
[0 to 2 / 2 / 1/step]
0: FIXED
*ENG
1: INITIALIZED
2: CALCULATED
*ENG
[0 to 9 / 4 / 1 time/step]
*ENG
[0 to 9 / 3 / 1 time/step]
*ENG [0 to 9 / 0 / 1 time/step]
9-117
System Service Mode
D037/D038/D040/D041