Ricoh D037 Service Manual page 474

SC Tables
No. Type
[3004] Command error
When the main switch is turned on or starting the self-diagnostic, the
- -
HDD stays busy for the specified time or more.
- -
1.
- - 2.
3.
No. Type
CTL Self-diagnostic error: NIB
823
B [XXXX]: Detailed error code
MAC address check sum error
[6101] The result of the MAC address check sum does not match the check
sum stored in ROM.
PHY IC error
[6104]
The PHY IC on the controller cannot be correctly recognized.
PHY IC loop-back error
[6105] An error occurred during the loop-back test for the PHY IC on the
controller.
- Replace the controller.
No. Type
[1401]
CTL
Self-diagnosis error: Standard NVRAM
824
D
The controller cannot recognize the standard NVRAM installed or
detects that the NVRAM is defective.
D037/D038/D040/D041
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Loose connection
Defective HDD
Defective controller
Check that the HDD is correctly connected to the controller.
Replace the HDD.
Replace the controller.
Details (Symptom, Possible Cause, Troubleshooting Procedures)
Details (Symptom, Possible Cause, Troubleshooting Procedures)
4-52 SM Appendix