Ricoh D037 Service Manual page 830

System Service Mode
F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing method is
8 063
specified by the application.
Note: Finishing features for fax jobs are not available at this time.
P:FIN Jobs
8 064
These SPs total finishing methods for print jobs only. The finishing method
is specified by the application.
S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing method
8 065
is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs
These SPs total finishing methods for jobs output from within the document
8 066
server mode screen at the operation panel. The finishing method is
specified from the print window within document server mode.
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
8 067
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
D037/D038/D040/D041
*CTL
*CTL
*CTL
*CTL
*CTL
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
9-296
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
[0 to 9999999/ 0 / 1]
SM Appendix