Ricoh D037 Service Manual page 78

Caster Table (D488)
table.
Use the screw holes [B] and [C] if the one-tray paper feed unit (D425) is installed
on the caster table.
3. Grasp the handle [A] and grips [B] of the machine, if the copier is to be installed on the
caster table.
Hold the handle and grips of the machine when you lift and move the machine.
4. Lift the copier or one-tray paper feed unit [C], and then install it on the caster table [D].
5. Pull out tray 2 of the mainframe or the tray of the one-tray paper feed unit.
6. Secure the machine or one-tray paper feed unit to the caster table (step screw x 2)
7. Reinstall the tray in the mainframe or one-tray paper feed unit.
8. Adjust the five leveling adjustors of the caster table.
D037/D038/D040/D041 2-28 SM