Ricoh D037 Service Manual page 639

004 Paper Transfer: Low: 2nd
[SP 3: T-Edge Correction] Special 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2852 and SP2857 are multiplied by these SP values.
2873
Standard: 120mm/sec, Low: 60mm/sec
The paper trailing edge area can be adjusted with SP2874.
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 3: Sw Timing: T-Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2874
plate at the paper trailing edge between the erase margin area and the image
area.
Standard: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 3: Env. Correct Table]
2880
Standard: 120mm/sec, Low: 60mm/sec
003 Paper Transfer:BW:Standard:1st
004 Paper Transfer:BW:Standard:2nd
SM Appendix
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to -100 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [1 to 50 / 23 / 1-uA /step]
*ENG [1 to 50 / 26 / 1-uA /step]
9-105
System Service Mode
D037/D038/D040/D041