Ricoh D037 Service Manual page 485

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
2. Initialize the HDD partition (SP5-832-007).
3. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD mail transfer error
An error is detected in the HDD at machine initialization.
CTL
Defective HDD
873
B
Power failure during an access to the HDD
1. Initialize the HDD partition (SP5-832-008).
2. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 1: HDD
An error is detected while all of the HDD or NVRAM are formatted
physically by the DataOverwriteSecurity Unit (D362).
CTL
874
DataOverwriteSecurity Unit (SD card) not installed
D
Defective HDD
1. Install the DataOverwriteSecurity Unit (D362).
2. Replace the HDD.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted
CTL
logically by the DataOverwriteSecurity Unit (D362).
875
D
The logical format for the HDD fails.
Turn the main switch off/on and try the operation again
SM Appendix 4-63
SC Tables
D037/D038/D040/D041