Ricoh D037 Service Manual page 676

System Service Mode
006 Kn: Lower
007 K5 Edit Point
008 K5 Target Voltage
009 K5 Approximate Method
010 K2: U/L Limit Coeff. 1
K2: Upper Limit
011
Correction
K2: Lower Limit
012
Correction
013 Diffusion Correction
016 K2: Check
3363 [ID Pattern Timing Setting] DFU
001 Scan YCMBk
002 Detection Delay Time
003 Delay Time
004 MUSIC Delay Time
D037/D038/D040/D041
*ENG [0 to 1 / 1 / 0.01 /step]
*ENG [0 to 1 / 0.15 / 0.01 /step]
*ENG [0 to 5 / 1.63 / 0.01 V/step]
[0 to 1 / 1 / 1 /step]
*ENG
0:Linear, 1: Curve
*ENG [0 to 1 / 0 / 0.01 /step]
*ENG [–0.2 to 0.4 / 0.07 / 0.01 /step]
*ENG [–0.2 to 0.4 / –0.07 / 0.01 /step]
*ENG [0.75 to 1.35 / 1 / 0.01 /step]
*ENG
[0 to 1 / 0.25 / 0.001 /step]
Adjusts the detection timing for the
*ENG process control pattern.
[-500 to 500 / 0 / 1 mm/step]
Adjusts the timing when the paper
transfer unit is kept away from the image
*ENG
transfer belt.
[0 to 2500 / 400 / 1 msec/step]
Adjusts the processing timing for the
*ENG process control pattern.
[0 to 2500 / 1335 / 1 msec/step]
Adjusts the processing timing for the
pattern that is used for the line position
*ENG
adjustment.
[-2500 to 2500 / 300 / 1 msec/step]
9-142 SM Appendix