Sp2-Xxx (Drum) - Ricoh D037 Service Manual

System Service Mode
004 Fusing Exit Sn Fan
005 Fusing Exit Fan
006 Electrical Fan
007 PSU Fan
008 Solenoid Cooling Fan

SP2-XXX (Drum)

[Charge DC V:Fixed]
(Paper Type, Process Speed, Color)
2005
Paper Type –> Plain, Thick 1, Thick 2
Adjusts the DC component of the charge roller bias in the various print modes.
Charge bias (DC component) is automatically adjusted during process control;
therefore, adjusting these settings does not effect while process control mode
(SP3-041-1 Default: ON) is activated. When deactivating process control mode
with SP3-041-1, the values in these SP modes are used for printing.
001 Plain: Bk
002 Plain: C
003 Plain: M
004 Plain: Y
005 Thick 2&FINE: Bk
006 Thick 2&FINE: C
007 Thick 2&FINE: M
008 Thick 2&FINE: Y
[Charge DC V:Fixed]
2006
(Paper Type, Process Speed, Color)
Paper Type –> Plain, Thick 1, Thick 2
D037/D038/D040/D041
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 1000 / 600 / 10 –V/step]
*ENG
*ENG
*ENG
*ENG
9-24 SM Appendix