Ricoh D037 Service Manual page 616

System Service Mode
area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
003 Paper Transfer: 2nd
[Thick 3: T-Edge Correct] Thick 3 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2651 and SP2652 are multiplied by these SP values.
2656
Thick: 60 mm/sec
The paper trailing edge area can be adjusted with SP2657.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 3: Trailing Edge Correction]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2657
plate at the paper trailing edge between the erase margin area and the image
area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 3: Env. Correct Table] Thick 3 Paper: MM Environment Coefficient
Adjustment
2660
Thick: 60 mm/sec
003 Paper Transfer:BW:1st
004 Paper Transfer:BW:2nd
005 Paper Transfer: FC: 1st
D037/D038/D040/D041
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to -100 / 0 / 2 mm/step]
*ENG
*ENG [1 to 50 / 36 / 1 /step]
*ENG [1 to 50 / 13 / 1 /step]
*ENG
[1 to 50 / 23 / 1 /step]
9-82 SM Appendix