Ricoh D037 Service Manual page 612

System Service Mode
Adjusts the current for the paper transfer roller for thick2 paper in full color
mode.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 2: L-Edge Correct] Thick 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
2571
Thick: 60 mm/sec
The paper leading edge area can be adjusted with SP2572.
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 2: Switch Timing: L-Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2572
plate at the paper leading edge between the erase margin area and the image
area.
Thick: 60 mm/sec
001 Paper Transfer: 1st
002 Paper Transfer: 2nd
[Thick 2: Trailing Edge Correction] Thick 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2553 and SP2558 are multiplied by these SP values.
2573
Thick: 60 mm/sec
The paper trailing edge area can be adjusted with SP2574.
D037/D038/D040/D041
*ENG
[0 to 200 / 13 / 1 –μA /step]
*ENG
[0 to 200 / 15 / 1 –μA /step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 30 / 0 / 2mm/step]
*ENG
9-78 SM Appendix