Ricoh D037 Service Manual page 538

System Service Mode
1007 [By-Pass Size Detection] By-Pass Size Detection Display
0:LT SEF/ 1:LG
Enables or disables the automatic paper size detection function of the by-pass
tray.
001
This SP determines what paper size the machine detects if the detected size is
less than 8.5".
0: OFF (Letter/SEF), 1: ON (Legal/SEF)
1101 [Flicker Control]
001 Flicker Control
1103 [Fusing Idling] Fusing Idling Adjustment
011 Idling Start Temp.
012 Forced Idling Stop
013 Forced Idling Stop Temp.
014 Minimum Idling Time
016 Extra Idling Time (L)
017 Extra Idling Time (H)
018 Extra Idling Time (M)
019 Ex Idling Temp:P-Roll
020 Control Switch Temp
D037/D038/D040/D041
*ENG -
[0 or 1 / 0 / 1 /step]
*ENG 0: Flicker Control: OFF
1: Flicker Control: ON
*ENG
[0 to 75 / 75 / 1 deg/step]
*ENG [0 to 1 / 0 / 1 /step]
*ENG [100 to 180 / 100 / 1 deg/step]
*ENG
[0 to 10 / 2 / 1 sec/step]
Specifies how long the extra idling
operation is executed for each
environment.
*ENG
[0 to 60 / 0 / 1 sec/step]
Each environment is determined
with SP1112-001 and 002.
*ENG
[0 to 60 / 0 / 1 sec/step]
*ENG
*ENG
[0 to 160 / 100 / 1 deg/step]
*ENG
[0 to 15 / 15 / 1 deg/step]
9-4 SM Appendix