Ricoh D037 Service Manual page 736

System Service Mode
[Authentication Error Code]
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
002 Panel Disp
5490 [MF Key Card (Japan only)]
001 -
002 Count Mode Setting
5501 [PM Alarm]
001 PM Alarm Level
002 Original Count Alarm
D037/D038/D040/D041
Determines whether an error code
appears in the system log after a user
*CTL authentication failure occurs.
[0 to 1 / 0 / 1]
0: Off, 1: On
Determines whether an error code
appears on the operation panel after a
*CTL user authentication failure occurs.
[0 to 1 / 1 / 1]
1: On, 0: Off
Sets up operation of the machine with a
keycard.
[0 to 1 / 0 / 1]
*CTL 0: Disabled. Cancels operation without a
user code.
1: Enabled. Allows operation without a
user code.
*CTL -
Sets the PM alarm interval
*CTL [0 to 9999 / 0 / 1k printouts / step]
0: No PM Alarm
*CTL -
9-202 SM Appendix