Ricoh D037 Service Manual page 684

System Service Mode
value, toner is applied to the transfer belt at set intervals during the job to
prevent the blade from flipping over.
Execution Temp.
001
Threshold
3518 [Image Adj. Execution Flag] DFU
001 Toner End Recovery: Bk
002 Toner End Recovery: C
003 Toner End Recovery: M
004 Toner End Recovery: Y
005 Vsg Adjustment
006 Developer Agitation
007 Process Control
008 MUSIC
009 Drum Phase Adj.
010 Charge AC Control
011 Blade Damage Prevention
012 Vsg Average Error
D037/D038/D040/D041
*ENG [0 to 50/ 40 / 1°C/step]
*ENG
*ENG
*ENG
[0 or 1 / 0 / 1/step]
0: OFF. 1: ON
*ENG
*ENG
*ENG
[0 to 2 / 0 / 1/step]
*ENG
0: OFF. 1: ON (once), 2: ON (twice)
[0 to 2 / 0 / 1/step]
*ENG
0: OFF. 1: ON (once), 2: ON (twice)
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: OFF. 1: ON
*ENG
[0 or 1 / 0 / 1/step]
Sets "1", when the following values
shows.
*ENG Vsg_reg_ave:
3.5 ≤ Vsg_reg_ave ≤ 4.5 or
Vsg_dif_ave:
0.0 ≤ Vsg_dif_ave ≤ 0.5
9-150 SM Appendix