Line Position Adjustment Result - Ricoh D037 Service Manual

No. Result Description
"Voffset
Threshold"
(SP3-324-004)
Vsg Vsg adjustment
9 Adjustment has not been
error completed.

5.1.3 LINE POSITION ADJUSTMENT RESULT

SP2-194-010 to -012 (Line Position Adjustment Result: M, C, Y)
This SP shows the number as a line position adjustment result on the LCD. It shows which
color has an error (M, Y or C).
No. Result
0 Not done
Completed
1
successfully
Cannot detect
2
patterns
Fewer lines on
3 the pattern than
the target
More lines on
4 the pattern than
the target
5-9 Not used
For details, see the "Troubleshooting Guide - Line Position Adjustment" section.
SM Appendix
Possible Causes/Action
Defective BCU
1. Replace the ID sensors.
2. Check the connection.
3. Replace the BCU board.
Other cases
Retry SP3-321-010.
Description
Line position adjustment has not been done.
Line position adjustment has correctly been
done,
ID sensors have not detected the patterns for
line position adjustment.
The patterns, which ID sensors have detected,
are not enough for line position adjustment.
Not used in this machine.
-
5-5
Process Control Error Conditions
Note
-
-
See Note
See Note
-
-
D037/D038/D040/D041