Ricoh D037 Service Manual page 753

dedicates the line to Cumin-M only, or sets the line for sharing between
Cumin-M and a fax unit.
[0 to 1 / 0 / 1 /step]
0: Sharing Fax
1: No Sharing Fax
If this setting is changed, the copier must be cycled off and on.
SP5816 187 determines whether the off-hook button can be used to
interrupt a Cumin-M transmission in progress to open the line for fax
transaction.
173 Modem Serial Number
Retransmission Limit
Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
174
However, Cumin-M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP
to cancel the time restriction.
186 RCG-CM DebugbitSW
FAX TX Priority
This SP determines whether pushing the off-hook button will interrupt a
Cumin-M transmission in progress to open the line for fax transaction. This
187
SP can be used only if SP5816 164 is set to "0".
[0 or 1/ 0 / - ]
0: Disable, 1: Enable
200 Manual Polling
Regist: Status
201 Displays a number that indicates the status of the NRS service device.
0: Neither the NRS device nor Cumin device are set.
1: The Cumin device is being set. Only Box registration is completed. In this
SM Appendix
This SP displays the serial number registered for
the Cumin-M.
-
- Executes the manual polling.
9-219
System Service Mode
D037/D038/D040/D041