Ricoh D037 Service Manual page 650

System Service Mode
006 Execution Flag: C
007 Execution Flag: M
008 Execution Flag: Y
009 Initial Setting Off
[Toner Replenishment Mode] DFU
3022
Specifies the toner supply time for each color in the toner supply mode.
005 Execution Flag: Bk
006 Execution Flag: C
007 Execution Flag: M
008 Execution Flag: Y
3041 [Process Control Type]
Voltage Control
001
Enables or disables potential control.
LD Power Control
002
Selects the LD power control mode.
004
Pre-ACC Process
D037/D038/D040/D041
*ENG 0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD
*ENG
sensor initialization.
*ENG
Enables or disables developer
initialization. DFU
*ENG
[0 or 1 / 0 / 1/step]
0: Enable, 1: Disable
*ENG
[0 or 1 / 0 / 1/step]
*ENG
0: Flag OFF, 1: Flag ON
This flag is cleared after executing TD
*ENG
sensor initialization.
*ENG
[0 or 1 / 1 / 1/step ] Alphanumeric
0: FIXED (Use the fixed values for the charge
*ENG DC bias and development DC bias set with
SP2-005 and SP2-229.)
1: CONTROL
[0 or 1 / 1 / 1/step] Alphanumeric
*ENG 0: FIXED (at the value in SP2221-xxx)
1: CONTROL (adjusted by process control)
*ENG
[0 to 2 / 2 / 1/step]
9-116 SM Appendix