Ricoh D037 Service Manual page 734

System Service Mode
Access Password Max
002
Number
003 Monitor Interval
5417 [Access Attack]
Access Permissible
001
Number
002 Attack Detect Time
003 Productivity Fall Wait
004 Attack Max Number
5420 [User Authentication]
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has
D037/D038/D040/D041
Limits the number of passwords used by
the access exclusion and password
*CTL
attack detection functions.
[50 to 200 / 200 / 1 passwords]
Sets the processing time interval for
referencing user ID and password
*CTL
information.
[1 to 10 / 3 / 1 sec.]
Sets a limit on access attempts when an
excessive number of attempts are
*CTL
detected for MFP features.
[0 to 500 / 100 / 1]
Sets the length of time for monitoring the
*CTL frequency of access to MFP features.
[10 to 30 / 10 / 1 sec.]
Sets the wait time to slow down the
speed of certification when an excessive
*CTL number of access attempts have been
detected.
[0 to 9 / 3 / 1 sec.]
Sets a limit on the number of requests
received for certification in order to slow
down the certification speed when an
*CTL
excessive number of access attempts
have been detected.
[50 to 200 / 200 /1 attempt]
9-200
Rev. 04/16/2009
SM Appendix