Ricoh D037 Service Manual page 787

[Punch Position Adjustment]
6102
Adjusts the punching position in the sub scan direction.
001 Leading Edge Adjustment
[Jogger Position Adjustment]
6103
Adjusts the jogger position
001 -
[Punch Position Adjustment]
6104
Adjusts the punching position in the main scan direction.
001 Side-to-Side Adjustment
[Finisher Input Check] Finisher (D429)
6120
Displays the signals received from sensors and switches of the finisher. (
"Iutput Check Table" in this section")
[Finisher Output Check] Finisher (D429)
6121
Displays the signals received from sensors and switches of the finisher. (
"Output Check Table" in this section")
SP7-XXX (Data Log)
[Total SC Counter]
7401
Displays the number of SC codes detected.
001 SC Counter
SM Appendix
ENG
[-1.5 to 1.5 / 0 / 0.1mm/step]
ENG
[-1.5 to 1.5 / 0 / 0.1mm/step]
ENG
[-2.0 to 2.0 / 0 / 0.2mm/step]
*CTL [0 to 9999 / 0 / 1/step ]
9-253
System Service Mode
D037/D038/D040/D041