Ricoh D037 Service Manual page 748

System Service Mode
The certification has been stored, and the GW URL is being notified of
15
the successful completion of this event.
The storing of the certification has failed, and the GW URL is being
16
notified of the failure of this event.
The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
17
completed, but a certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
068
An SSL error notification has been issued. Issued after the certification
2
has expired.
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
083 Firmware Up Status
084 Non-HDD Firm Up
D037/D038/D040/D041
The ID of the request for certification.
Displays the status of the firmware update.
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
9-214 SM Appendix