Transporting The Machine; Main Frame - Ricoh D037 Service Manual

Hide thumbs Also See for D037:

Table of Contents

Copier Installation

longer distance.

Remove all trays from the optional paper feed unit.

2.3.6 TRANSPORTING THE MACHINE

Do SP 4806-001 to move the scanner carriage from the home position. This prevents

dust from falling into the machine during transportation.

Make sure there is no paper left in the paper trays. Then fix down the bottom plates

with a sheet of paper and tape.

Do one of the following:

Attach shipping tape to the covers and doors.

Shrink-wrap the machine tightly.

After you move the machine, Make sure you do the "Auto Color Registration"

as follows. This optimizes color registration.

Do the "Forced Line Position Adj. Mode c" (SP2-111-3).

Then do the "Forced Line Position Adj. Mode a" (SP2-111-1).

To check if SP 2-111-1 was successful, watch the screen during the process. A

message is displayed at the end. Also, you can check the result with SP

2-194-10 to -12.

Make sure that the side fences in the trays are correctly positioned to prevent

color registration errors.

D037/D038/D040/D041

Table of Contents