Ricoh D037 Service Manual page 694

System Service Mode
NOTE:
If the toner collection bottle has been replaced before the machine detects used
toner near full when this setting is set to "0", the machine cannot detect toner
collection bottle near full. In that case, set SP3-902-017 to "1".
Day Thresh:NF
012 Sets the threshold days for the near-full display. The near-full of the toner
collection bottle is displayed after the toner collection full sensor has detected
the actuator in the toner collection bottle.
013 Total Collected Toner
014 Full Detected Date
3810 [ITB T-Collection Bttl Full]
001 Condition
002 Detection Times
003 Print Page Af Near Full
Pixel Count After Near
004
Full
Pixel Count Af
005
Replacement
008 Coefficient
011 Notice Setting
D037/D038/D040/D041
*ENG
[1 to 30 / 10 / 1 day/step]
Displays the total amount of the used
*ENG toner.
[0 to 999999999 / 1 / 1]
Displays the date of the full detection
*ENG
for the toner collection bottle.
*CTL [0 to 4 / 0 / 1 /step]
*CTL [0 to 50 / - / 1 /step]
*CTL
[0 to 2000 / 0 / 1 sheet/step]
*CTL [0 to 200000 / - / 1 cm
Displays the pixel counter after
*CTL replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.1 to 1 / 1 / 0.1 /step]
Enables or disables the calling for
@Remote.
*ENG
[0 or 1 / 1 / - ]
0: Enable @Remote calling
1: Disable @Remote calling
9-160
2
/step]
2
/step]
SM Appendix