Ricoh D037 Service Manual page 634

System Service Mode
[SP 2: L-Edge Correct] Special 2 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
2821
Standard: 120mm/sec, Low: 60mm/sec
The paper leading edge area can be adjusted with SP2822.
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 2: SW Timing: L-Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2822
plate at the paper leading edge between the erase margin area and the image
area.
Standard: 120mm/sec, Low: 60mm/sec
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[SP 2: T-Edge Correct] Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing
edge in each mode. SP2803 and SP2807 are multiplied by these SP values.
2823
Standard: 120mm/sec, Low: 60mm/sec
The paper trailing edge area can be adjusted with SP2824.
D037/D038/D040/D041
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
9-100 SM Appendix