Ricoh D037 Service Manual page 604

System Service Mode
[Thin: T-Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
2473
SP values.
Standard: 120 mm/sec, Low: 60 mm/sec
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
[Thin: Switch Timing: T-Edge]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge
2474
plate at the paper trailing edge between the erase margin area and the image
area.
Standard: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer: Standard: 1st
003 Paper Transfer: Low: 1st
2480 [Thin: Env. Correct Table]
003 Paper Transfer: BW: Standard: 1st
005 Paper Transfer: FC: Standard: 1st
009 Paper Transfer: BW: Standard: 1st
011 Paper Transfer: FC: Standard: 1st
2482 [Glossy: Bias: BW]
001 Paper Transfer: 1st
D037/D038/D040/D041
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
[-100 to 0 / 0 / 2 mm/step]
*ENG
*ENG [1 to 50 / 24 / 1 /step]
*ENG [1 to 50 / 38 / 1 /step]
*ENG
[1 to 50 / 32 / 1 /step]
*ENG [1 to 50 / 44 / 1 /step]
*ENG
[0 to 200 / 15 / 1 –μA /step]
9-70 SM Appendix