Ricoh D037 Service Manual page 601

Adjusts the correction to the paper transfer roller current at the paper leading
edge in each mode. SP2403 and SP2407 are multiplied by these SP values.
Normal: 120 mm/sec, Low: 60 mm/sec
The paper leading edge area can be adjusted with SP2422.
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[Plain: Sw Timing: L-Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2422
plate at the paper leading edge between the erase margin area and the image
area.
Standard: 120 mm/sec, Low: 60 mm/sec
001 Paper Transfer: Standard: 1st
002 Paper Transfer: Standard: 2nd
003 Paper Transfer: Low: 1st
004 Paper Transfer: Low: 2nd
[Plain: T-Edge Correction] Plain Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2403 and SP2407 are multiplied by these
2423
SP values.
Standard: 120 mm/sec, Low: 60 mm/sec
The paper trailing edge area can be adjusted with SP2424.
001 Paper Transfer: Standard: 1st
SM Appendix
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
*ENG [0 to 400 / 100 / 5%/step]
9-67
System Service Mode
D037/D038/D040/D041