Settings For @Remote Service - Ricoh D037 Service Manual

Copier Installation
Specifies whether the counter is doubled for
SP5-104-001 A3/11" x 17" paper. When you have to
change this setting, contact your supervisor.
Service Tel. No. Setting
SP No.
5812-002 programs the service station fax
number. The number is printed on the
SP5-812-001
counter list when the meter charge mode is
through 004
selected. This lets the user fax the counter
data to the service station.

Settings for @Remote Service

Prepare and check the following check points before you visit the customer site.
For details, ask the @Remote key person.
Check points before making @Remote settings
1. The setting of SP5816-201 in the mainframe must be "0".
2. Device ID2 (SP5811-003) must be correctly programmed.
6 spaces must be put between the 3-digit prefix and the following 8-digit number
(e.g. xxx______xxxxxxxx).
ID2 (SP5811-003) and the serial number (SP5811-001) must be the same (e.g.
ID2: A01______23456789 = serial No. A0123456789)
3. The following settings must be correctly programmed.
Proxy server IP address (SP5816-063)
Proxy server Port number (SP5816-064)
Proxy User ID (SP5816-065)
Proxy Password (SP5816-066)
4. Get a Request Number
Execute the @Remote Settings
1. Enter the SP mode.
2. Input the Request number which you have obtained from @Remote Center GUI, and
then enter [OK] with SP5816-202.
3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.
4. Check the confirmation result with SP5816-204.
D037/D038/D040/D041
Function
2-16
"No": Single counting
Default
SM